Connection and operation
Modalità OBD/BENCH/BOOT, procedure guidate, lettura/scrittura e operatività in Suite/App/officina.
Yes. All training is designed to be concrete and operational, with real examples and cases that can be applied immediately in everyday work.
Yes. Where supported, you can reset DTCs directly from the Suite, without using external tools for this operation.
Yes. With Bench and Boot modes, you can perform cloning operations on supported control units.
Yes. In the Vehicle List you can find all supported operations: reading, writing, cloning and available functions. This way, you know exactly what you can do before working on the vehicle.
Yes, where supported. The available functions are managed directly from Alientech Suite through KESS3 and from the Powergate App for Powergate, following the guided software workflow.
No. Many vehicles can be worked on directly via OBD or Bench.
Yes. The App guides the user step by step with clear feedback throughout all phases.
Yes. Alientech Suite uses step-by-step guided procedures, with specific instructions for each ECU and connection mode, reducing the risk of error during operations.
Check whether it is included among the available functions in the Vehicle List, marked with the light bulb icon, and keep Alientech Suite or the Powergate App updated.
Yes. You do not need to be a programmer. The software guides you step by step through reading and writing operations, with official manuals and specific procedures for each vehicle.
Yes, because the process is guided. You set everything up first: the customer only has to follow the steps.
It depends on the vehicle and the operation. OBD → faster and non-invasive Bench → direct access without opening the ECU Boot → full access with the control unit open The Suite always indicates the correct mode.
No. The interface is simple and the display modes (table, 2D, 3D) help you quickly understand the file structure.
They are real tuning examples, developed by trainers on specific control units.
They show you step by step how to work on files and calibrations in a clear and repeatable way.
You can read and reset error codes directly from Alientech Suite, with a fast and guided process. It is a useful function to check the vehicle status before and after each intervention.
You can read, write and clone control units, manage DTCs, monitor parameters with DataLogger and measure performance with DynoDrive. All functions are integrated into the same environment.
Where supported, you can perform specific functions such as steering alignment, differential locking/unlocking, wheel size resizing and many other operations.
It works in OBD with dedicated cables (cars and motorcycles), depending on the vehicle.
For each application, you can find the available modes: OBD (diagnostic port), BENCH (direct connector access) and BOOT (full access with the control unit open). This allows you to choose the most suitable method for the job to be performed.
Reading DTCs before working on the vehicle lets you check whether anomalies are already present. This gives you more control and helps you distinguish pre-existing issues from those that may appear after the intervention.