KESSv2 allows you to read and write through OBD agriculture vehicles such as Case Ih, Claas Tractors, New Holland and Steyr, supporting Bosch MD1CE101 ECUs. More than 700 new vehicles available!
The Alientech Drivers development team has updated the map list available for the BOSCH MED17.7.2 files present within the ECU of the MERCEDES BENZ group.
The ECU involved is:
In addition to the standard maps useful to significantly increase the performance of the ECU Bosch MED17.7.2 equipped on Mercedes-Benz Gasoline vehicles, we present some specific maps, which will lead you to even better results.
Mercedes-Benz Gasoline. Any examples?
Also, Infiniti mounts Mercedes motors on Q30, QX30, Q50 and Q60 from 1600cc with 122 and 156cv up to 2000cc with 211cv.
The spark advance maps manage the ignition angle, i.e., with how many degrees in advance compared to the top dead center (TDC) the spark must strike.
Having full control of the ignition, thanks to those maps it is possible to have it postponed during the overrun phase to activate the pop & bang.
The speed limiter map has inside the value in Km / h to which the machine is limited. When this speed is reached, fuel cutting is involved to prevent the vehicle from exceeding it.
The map has several values, one of these is enabled during the vehicle configuration phase by the manufacturer, depending on the type of application (for example Vehicles for commercial use or AMG sports cars) by increasing the desired value, this limitation can be eliminated.
With these maps it is possible to disable the monitoring of the catalyst Lambda sensor, to install a straight pipe or racing style exhaust.
Using the “Rpm threshold and Delay time for overrun cut off activation” maps and the Spark advance maps, it is possible to generate the overrun bursts commonly called “pops and bangs” Thanks to these maps it is possible to adjust the function according to customer preferences by varying the intervention of the “cut off” function and adjusting the ignition angle in overrun to make the sound more or less aggressive.
In the next few weeks, Drivers update on Continental SID307 and SID310 equipped on Mercedes-Benz, Infiniti, Renault and Nissan. Any examples?
Mercedes A Class(W176) 180d 109cv
Nissan Juke 1.5 DCi 109cv
Renault Kangoo 1.5 DCi 109cv
Renault Megane (III) 1.5 DCi 109cv
Mercedes A Class (W176) 180d 115cv
Infiniti Q30 1500d 115cv
Renault Clio (IV) 1.5 DCi 110cv
Renault Megane (IV) 1.5 DCi 110cv
Renault Kadjar 1.5 DCi 110cv
Renault Master 2.3 DCi 130cv
Nissan Qashqai 1.5 DCi 110cv
Nissan Navara 2.3 Dci 160cv
Reading, writing, and cloning in Boot and Service Mode. New Bosch ECUS equipped on petrol and diesel BMW, IVECO, Opel and PSA vehicles.
Read, write, and clone in Boot Mode and Service Mode heavy vehicles and earthmovers Volvo Construction, Scania and Mitsubishi equipped with ECU Continental ACM, EMS, and Denso.
ECM Titanium driver update on Bosch EDC17CP57 equipped on Mercedes-Benz Vehicles. Find out what you can do by intervening on the right maps!
KESSv2. The most versatile tool for reading and writing through OBD gives you the opportunity to intervene on commercial vehicles with 2.0 BlueHDi engine and ECU Delphi