The Alientech Drivers development team has updated the map list available for the BOSCH MED17.7.2 files present within the ECU of the MERCEDES BENZ group.
The ECU involved is:
In addition to the standard maps useful to significantly increase the performance of the ECU Bosch MED17.7.2 equipped on Mercedes-Benz Gasoline vehicles, we present some specific maps, which will lead you to even better results.
Mercedes-Benz Gasoline. Any examples?
Also, Infiniti mounts Mercedes motors on Q30, QX30, Q50 and Q60 from 1600cc with 122 and 156cv up to 2000cc with 211cv.
The spark advance maps manage the ignition angle, i.e., with how many degrees in advance compared to the top dead center (TDC) the spark must strike.
Having full control of the ignition, thanks to those maps it is possible to have it postponed during the overrun phase to activate the pop & bang.
The speed limiter map has inside the value in Km / h to which the machine is limited. When this speed is reached, fuel cutting is involved to prevent the vehicle from exceeding it.
The map has several values, one of these is enabled during the vehicle configuration phase by the manufacturer, depending on the type of application (for example Vehicles for commercial use or AMG sports cars) by increasing the desired value, this limitation can be eliminated.
With these maps it is possible to disable the monitoring of the catalyst Lambda sensor, to install a straight pipe or racing style exhaust.
Using the “Rpm threshold and Delay time for overrun cut off activation” maps and the Spark advance maps, it is possible to generate the overrun bursts commonly called “pops and bangs” Thanks to these maps it is possible to adjust the function according to customer preferences by varying the intervention of the “cut off” function and adjusting the ignition angle in overrun to make the sound more or less aggressive.
In the next few weeks, Drivers update on Continental SID307 and SID310 equipped on Mercedes-Benz, Infiniti, Renault and Nissan. Any examples?
Continental SID307
Mercedes A Class(W176) 180d 109cv
Nissan Juke 1.5 DCi 109cv
Renault Kangoo 1.5 DCi 109cv
Renault Megane (III) 1.5 DCi 109cv
Continental SID310
Mercedes A Class (W176) 180d 115cv
Infiniti Q30 1500d 115cv
Renault Clio (IV) 1.5 DCi 110cv
Renault Megane (IV) 1.5 DCi 110cv
Renault Kadjar 1.5 DCi 110cv
Renault Master 2.3 DCi 130cv
Nissan Qashqai 1.5 DCi 110cv
Nissan Navara 2.3 Dci 160cv
A special gift for our customers.
Choose to operate via OBD or BENCH mode and work on the latest Italian brand motorbikes with the most advanced reprogramming tool on the market.
Read and write ECUs installed on Buick, Cadillac, Chevrolet, GMC, Pontiac and Saturn brand vehicles thanks to the new protocol for KESS3.
Four new protocols enlarge the KESS3 vehicle list, working with a single tool in simple and safe ways on diesel engines installed on Alfa Romeo, Fiat, Lancia, Mazda and Toyota brands.
Two new motorbike protocols are available for KESS3: work on new ECUs with different connection modes using just one tool.
Thanks to two new protocols dedicated to the heavy-duty market, you will be able to operate on a large vehicle base and meet the customer’s needs.
For thirty years, as a team, we’ve been developing, creating and producing the best tools and software for chiptuners and mechatronics.
We have evolved during these years of hard work. From a dynamic start-up we have become a multinational firm with offices and dealers all over the world.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech Srl 2021 – © Alientech All rights reserved Privacy – Cookie – Terms of use – Legals
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984
