K-SUITE – RELEASE 4.28
It is the best for a faster and easier work. To have more business opportunities. To get the best of chiptuning, with a simple update.
Our team of engineers and technicians has focused on the TCMs, to offer you news that only Alientech can offer you.
Dozens of tests and trials have allowed us to update the K-Suite management software with 6 new protocols dedicated to the DSG TCM equipped on the VAG group vehicles.
Here are a few details, to understand the importance of the update.
The TCM brands involved are BOSCH, CONTINENTAL, and TEMIC, in the DSG DQ200 and 250MQB, DSG 200 MQB, DSG DL501, VL381, ZF ASG SQ100 equipped on the Audi, Seat, Skoda, Volkswagen and Porsche.
New K-TAG Protocol
|ZF ASG SQ100||SEAT||√||BOOTLOADER TRICORE|
|ZF ASG SQ100||SKODA||√||BOOTLOADER TRICORE|
|ZF ASG SQ100||VOLKSWAGEN||√||BOOTLOADER TRICORE|
|DQ200 MQB||AUDI||√||SERVICE MODE|
|DQ200 MQB||SEAT||√||SERVICE MODE|
|DQ200 MQB||SKODA||√||SERVICE MODE|
|DQ200 MQB||VOLKSWAGEN||√||SERVICE MODE|
|DQ250 MQB||AUDI||√||SERVICE MODE|
|DQ250 MQB||SEAT||√||SERVICE MODE|
|DQ250 MQB||SKODA||√||SERVICE MODE|
|DQ250 MQB||VOLKSWAGEN||√||SERVICE MODE|
The goal is clear: safer, faster, and more reliable recalibrations even on the TCMs, thanks to K-TAG! As you know, to really get the most from a vehicle, action must be taken with reprogramming on the ECU for lower consumption or higher performances. However, with interventions also to the TCM, the vehicle elaboration becomes really comprehensive and supremely optimized: part of the performance limitations are inserted in the TCM, so, on important changes, it is necessary to modify also the TCM to 100% develop the elaboration.
Thanks to the full reading and writing possibility, you can satisfy even more customers because you can repair the TCU, thus avoiding replacing one of the most expensive part of the vehicle. A good advantage for the vehicle’s owner and surely for your business.
The Service Mode protocols that we offer are the most concrete and real answer: we give you reliable solutions that make your job faster, easier, and safer.
VR reading and OBD writing with KESSv2 to complete the TCM remapping without risks, with reliable and assured results.
The Virtual Reading gives you the opportunity to receive the correct file and with KESSv2 it can be done quickly and easily: our tool automatically identifies the ECU, researches the corresponding calibration in our servers and in very few guided steps it provides the appropriate original file.
Read and write in Service Mode.
Reading and writing through OBD for the ECU 38770 (VR, WR) and Keihin 61941031000 (RD, WR) equipped on Honda and Husqvarna.
ECM Titanium Drivers Update on Continental SIMOS10 and SIMOS18 equipped on Audi, Seat, Skoda and Volkswagen. Go to the top of the performance, make a difference in your profession!
Work without opening the ECU on hundreds of Mercedes, Nissan, Opel, Renault, and Volvo.
Reprogramming FULL OBD for ECU Delphi CRD3, equipped on Class A, CLA, GLA, SLC and Sprinter Diesel.
The Alientech Drivers development team has updated the map list available for the Bosch EDC17cp54 equipped on VAG Group vehicles.