
Intervene now on the DCUs that equip some Ford brand models.
Work to tune and repair on the Bosch DCU17PC43 unit with the new BENCH mode protocol for KESS3.
K-SUITE – RELEASE 4.28
It is the best for a faster and easier work. To have more business opportunities. To get the best of chiptuning, with a simple update.
Our team of engineers and technicians has focused on the TCMs, to offer you news that only Alientech can offer you.
Dozens of tests and trials have allowed us to update the K-Suite management software with 6 new protocols dedicated to the DSG TCM equipped on the VAG group vehicles.
Here are a few details, to understand the importance of the update.
The TCM brands involved are BOSCH, CONTINENTAL, and TEMIC, in the DSG DQ200 and 250MQB, DSG 200 MQB, DSG DL501, VL381, ZF ASG SQ100 equipped on the Audi, Seat, Skoda, Volkswagen and Porsche.
New K-TAG Protocol
ZF ASG SQ100 | SEAT | √ | BOOTLOADER TRICORE |
ZF ASG SQ100 | SKODA | √ | BOOTLOADER TRICORE |
ZF ASG SQ100 | VOLKSWAGEN | √ | BOOTLOADER TRICORE |
VL381 | AUDI | √ | SERVICE MODE |
DL501 | AUDI | √ | SERVICE MODE |
DL501 | PORSCHE | √ | SERVICE MODE |
DQ200 | AUDI | √ | SERVICE MODE |
DQ200 | SEAT | √ | SERVICE MODE |
DQ200 | SKODA | √ | SERVICE MODE |
DQ200 | VOLKSWAGEN | √ | SERVICE MODE |
DQ200 MQB | AUDI | √ | SERVICE MODE |
DQ200 MQB | SEAT | √ | SERVICE MODE |
DQ200 MQB | SKODA | √ | SERVICE MODE |
DQ200 MQB | VOLKSWAGEN | √ | SERVICE MODE |
DQ250 MQB | AUDI | √ | SERVICE MODE |
DQ250 MQB | SEAT | √ | SERVICE MODE |
DQ250 MQB | SKODA | √ | SERVICE MODE |
DQ250 MQB | VOLKSWAGEN | √ | SERVICE MODE |
The goal is clear: safer, faster, and more reliable recalibrations even on the TCMs, thanks to K-TAG! As you know, to really get the most from a vehicle, action must be taken with reprogramming on the ECU for lower consumption or higher performances. However, with interventions also to the TCM, the vehicle elaboration becomes really comprehensive and supremely optimized: part of the performance limitations are inserted in the TCM, so, on important changes, it is necessary to modify also the TCM to 100% develop the elaboration.
Thanks to the full reading and writing possibility, you can satisfy even more customers because you can repair the TCU, thus avoiding replacing one of the most expensive part of the vehicle. A good advantage for the vehicle’s owner and surely for your business.
The Service Mode protocols that we offer are the most concrete and real answer: we give you reliable solutions that make your job faster, easier, and safer.
VR reading and OBD writing with KESSv2 to complete the TCM remapping without risks, with reliable and assured results.
The Virtual Reading gives you the opportunity to receive the correct file and with KESSv2 it can be done quickly and easily: our tool automatically identifies the ECU, researches the corresponding calibration in our servers and in very few guided steps it provides the appropriate original file.
Read and write in Service Mode.
DL501 | AUDI | Virtual | Partial | N.A. | N.A. | N.A. |
DL501 | PORSCHE | Virtual | Partial | N.A. | N.A. | N.A. |
DQ200 | AUDI | Virtual | Partial | Partial | Partial | 144300K254 |
DQ200 | SEAT | Virtual | Partial | Partial | Partial | 144300K254 |
DQ200 | SKODA | Virtual | Partial | Partial | Partial | 144300K254 |
DQ200 | VOLKSWAGEN | Virtual | Partial | Partial | Partial | 144300K254 |
DQ250 | AUDI | Virtual | Partial | Partial | Partial | 144300K267 |
DQ250 | SEAT | Virtual | Partial | Partial | Partial | 144300K267 |
DQ250 | SKODA | Virtual | Partial | Partial | Partial | 144300K267 |
DQ250 | VOLKSWAGEN | Virtual | Partial | Partial | Partial | 144300K267 |
DQ250 MQB | AUDI | N.A. | N.A. | Full | Full | 144300K267 |
DQ250 MQB | SEAT | N.A. | N.A. | Full | Full | 144300K267 |
DQ250 MQB | SKODA | N.A. | N.A. | Full | Full | 144300K267 |
DQ250 MQB | VOLKSWAGEN | N.A. | N.A. | Full | Full | 144300K267 |
DQ500 | AUDI | Virtual | Partial | Partial | Partial | 144300K259 |
NEW Cable Service Mode
To work in Service Mode on these TCMs it is necessary to use the new 144300T118 cable!
Work to tune and repair on the Bosch DCU17PC43 unit with the new BENCH mode protocol for KESS3.
Even more possibilities for modification and customisation are available for Mercedes Benz.
Thanks to the latest KESS3 upgrade, you can work in BENCH mode on this ECU and enhance performance with the best solution on the market for reliability and efficiency.
A new release is now available for Alientech’s remapping software.
A new protocol for KESS3 allows you to work with total reliability on the ECUs that are equipped on Xylo, Nuvosport, Bolero, Imperio and Quanto turbo diesel, produced between 2011 and 2016.
Thanks to the two new OBD protocols available only on KESS3, you can work on these Delphi ECUs easily, quickly and effectively.
For thirty years, as a team, we’ve been developing, creating and producing the best tools and software for chiptuners and mechatronics.
We have evolved during these years of hard work. From a dynamic start-up we have become a multinational firm with offices and dealers all over the world.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech Srl 2021 – © Alientech All rights reserved Privacy – Cookie – Terms of use – Legals
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984