K-SUITE – RELEASE 3.93
THE NOW SUPPORTED ECUS ARE CONTROLLED BY THE FOLLOWING MICROPROCESSORS:
The connections between the ECU and K-TAG, are performed through the JTAG line and the functions that are available for these protocols are: reading, writing, and cloning.
Thanks to the large number of vehicles generations supported, you will be able to offer both a repair and a calibration service, thus proposing different solutions to the vehicle owner.
THROUGH THIS LAST K-SUITE UPDATE, YOU WILL WORK WITH K-TAG ON THE FOLLOWING ECUS:
New K-TAG Protocol
Read and write in boot Mode.
| Adam 1.0 Turbo Ecotec | Delphi E80 | RD, WR, Clone |
| Adam 1.0 Turbo FlexFuel | Delphi E80 | RD, WR, Clone |
| Astra K 1.0 12v Turbo SIDI 5AT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.0 12v Turbo SIDI Ecoflex 5AT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.4 Turbo 6AT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.4 Turbo 6MT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.4 Turbo ecoFLEX 6AT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.4 Turbo ecoFLEX 6MT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.6 Turbo ecoFlex | Delphi E80 | RD, WR, Clone |
| Astra K 1.6 Turbo SIDI 6AT | Ac Delco E80 | RD, WR, Clone |
| Astra K 1.6 Turbo SIDI 6MT | Ac Delco E80 | RD, WR, Clone |
New K-TAG Protocol
Read and write in boot Mode.
| Lacrosse 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| Regal 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
Read and write in boot Mode.
| ATS 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| CT6 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| CTS 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| Xt5 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| XT6 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| XTS 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
Read and write in boot Mode.
| Blazer 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| Camaro 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| Colorado 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
Read and write in boot Mode.
| Acadia 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
| Canyon 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
Read and write in boot Mode.
| Commodore 3.6 V6 8AT | Ac Delco E82 | RD, WR, Clone |
New K-TAG Protocol
Read and write in boot Mode.
| Cruze 1.7 16v VCDi | Ac Delco E87 | RD, WR, Clone |
| Tracker 1.7 D AWD | Ac Delco E87 | RD, WR, Clone |
| Tracker 1.7 D FWD Automatic | Ac Delco E87 | RD, WR, Clone |
| Trax 1.7 D AWD | Ac Delco E87 | RD, WR, Clone |
| Trax 1.7 D FWD Automatic | Ac Delco E87 | RD, WR, Clone |
Read and write in boot Mode.
| Colorado 2.8 TD | Ac Delco E87 | RD, WR, Clone |
| Trax 1.7 D AWD | Ac Delco E87 | RD, WR, Clone |
| Trax 1.7 D FWD Automatic | Ac Delco E87 | RD, WR, Clone |
Read and write in boot Mode.
| Astra J 1.7 CDTI ecoFlex | Ac Delco E87 | RD, WR, Clone |
| Corsa D 1.7 CDTI EcoFlex | Ac Delco E87 | RD, WR, Clone |
| Meriva B 1.7 CDTI | Ac Delco E87 | RD, WR, Clone |
| Meriva B 1.7 CDTI ecoFlex | Ac Delco E87 | RD, WR, Clone |
| Mokka 1.7 CDTI ecoFLEX | Ac Delco E87 | RD, WR, Clone |
How to download the new update? No new accessory required: you will simply need to have a Master or Slave active subscription, to have the new protocols for free!
Improve your performance and repair automatic transmissions that equip the BMW, Audi, Chrysler, Dodge, Ford and Volvo brands without risk of damage to the TCUs thanks to the KESS3’s reliability and ease of connection.
Another protocol has been added to the list of reprogramming solutions dedicated to motorcycles. From today, with KESS3 you can work in BENCH mode on the BOSCH ME17.2.42 BMS-O ECUs equipped on BMW R1250 GS and BMW S1000 RR MY2022 with Euro5 technology.
A new KESS3 upgrade: work safe and easily on DAF, Kenworth, Peterbilt and Yutong trucks that made the history of road transport all over the world. Also operate on Bosch EDC7C4 and Denso 25841077 ECUs in Bench mode.
After this upgrade, you can read and write in Bench mode the Bosch ME17.9.55 TC1724 and MITSUBISHI 33920-65D6 ECUs that equip the Honda and Suzuki brands.
Another KESS3 update dedicated to the motorbike world! Now you can work via OBD on Denso ECUs (SH7058) for the Yamaha brand and in BOOT mode for the Kawasaki.
Thanks to this new KESS3 update, you can work on further Bosch, Denso and Hitachi ECUs that are equipped on Isuzu, Nissan, Mitsubishi and Toyota brands.
For thirty years, as a team, we’ve been developing, creating and producing the best tools and software for chiptuners and mechatronics.
We have evolved during these years of hard work. From a dynamic start-up we have become a multinational firm with offices and dealers all over the world.
Via dei Cordari 1, 13039 Trino (VC), Italia
Tel.: +390161801025
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech Srl 2021 – © Alientech All rights reserved Privacy – Cookie – Terms of use – Legals
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984