K-SUITE – RELEASE 3.89
The Alientech technicians have been focusing on the BMW most powerful two wheels: start programming the ECU Bosch ME17.2.42 BMS-O through OBD-II with the 724 KESSv2 protocol!
With the new K-Suite update, we can provide you the OBD-II programming through KESSv2 and the virtual reading of the S 1000 RR and R 1250 models of the latest two wheels vehicles of the German car manufacturer BMW.
But that is not all! Inside of Alientech Academy, you will find a dedicated course just on the ECU Bosch ME17.2.42 BMS-O. You will find showed all the vehicle characteristics and also the ones of those vehicles that are equipped with the same engine or a similar version. At the end of the course you will be able to create a mapping that will guarantee you best performances!
You will make your passion for the two wheels engines even more intriguing and thrilling, by making more powerful an engine with a maximum torque of 143 Nm. With this update you will be able to increase the horses and the torque: be ready to blow your BMW Motorrad potential!
HOW DOES THE VIRTUAL READING FUNCTION WORKS?
The virtual reading function is now available for the Master and Slave versions of KESSv2 with active subscription. To proceed to the reading, you simply need to do the vehicle ID and the original file will automatically be downloaded. If the calibration is not available, it is possible however to read the ECU through K-TAG.
New KESSv2 Protocol
RD, WR in Bench Mode
| Motorrad R 1250 GS Adventure K51 | Bosch ME17.2.42 BMS-O | VR, WR |
| Motorrad R 1250 GS K50 | Bosch ME17.2.42 BMS-O | VR, WR |
| Motorrad R 1250 R K53 | Bosch ME17.2.42 BMS-O | VR, WR |
| Motorrad R 1250 RS K54 | Bosch ME17.2.42 BMS-O | VR, WR |
| Motorrad R 1250 RT K52 | Bosch ME17.2.42 BMS-O | VR, WR |
| Motorrad S 1000 RR K67 | Bosch ME17.2.42 BMS-O | VR, WR |
Work to tune and repair on the Bosch DCU17PC43 unit with the new BENCH mode protocol for KESS3.
Even more possibilities for modification and customisation are available for Mercedes Benz.
Thanks to the latest KESS3 upgrade, you can work in BENCH mode on this ECU and enhance performance with the best solution on the market for reliability and efficiency.
A new release is now available for Alientech’s remapping software.
A new protocol for KESS3 allows you to work with total reliability on the ECUs that are equipped on Xylo, Nuvosport, Bolero, Imperio and Quanto turbo diesel, produced between 2011 and 2016.
Thanks to the two new OBD protocols available only on KESS3, you can work on these Delphi ECUs easily, quickly and effectively.
For thirty years, as a team, we’ve been developing, creating and producing the best tools and software for chiptuners and mechatronics.
We have evolved during these years of hard work. From a dynamic start-up we have become a multinational firm with offices and dealers all over the world.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech Srl 2021 – © Alientech All rights reserved Privacy – Cookie – Terms of use – Legals
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984