Menu
Menu
Menu
Menu
Thanks to three KESS3’s new protocols, you can work on the Bosch EDC17C81, Mitsubishi E6T91977HP and Mitsubishi E6T8577X ECUs installed on Mahindra XSUV 500 from 2011, Suzuki Jimny from 2018 and Mitsubishi Xpander from 2017 to 2019.
UPGRADE 1.24
Thanks to the BENCH mode on KESS3, you can now read and write three new supported vehicles in total safety, directly from the ECU connector. Satisfy your customers’ needs with a tailor-made service and increase your business opportunities.
New ECUs supported:
Make the most out from KESS3 to boost the engine performance, reduce fuel consumption and carry out repairs on every type of vehicle that comes in your workshop.
KESS3
CAR
BENCH MODE
RD, WR in Bench Mode
| Xuv500 | 2.2d 16v | Diesel | 103 kW |
KESS3
CAR
BENCH MODE
RD, WR in Bench Mode
| Jimny | 660 | Petrol | 48 kW |
KESS3
CAR
BENCH MODE
RD, WR in Bench Mode
| Xpander | 1.5 16v MIVEC | Petrol | 77 kW |
Protocols are also supported by K-TAG.
Tuning engine management parameters is not just about increasing vehicle performance. It is about customising the driving style, reducing fuel consumption and optimising the power delivery.
Alientech has always played a leading role in this sector by offering concrete and effective solutions for reprogramming professionals.
Working on engine control units is a service largely dedicated to repair.
The components installed on the engine, controlled by electronics, can in some cases avoid replacement through recalibration.
Sometimes it is possible to save large sums of money, for a big advantage of your business!
ECM Titanium: the performance configurator for vehicles
Customers’ satisfaction is your daily work: thanks to a precise and reliable service you will gain your customers’ loyalty and build an ever wider and more profitable network. Good recalibration is an effective method for this purpose and ECM Titanium is the solution.
In order to increase driving pleasure and performance on this type of vehicle, equipped with a N/A 1.6 16v Mivec engine, it is necessary to adjust the management parameters of the lambda sensor, injection, advance and phase shifter. The modelling of the delivery line and the increased power are easily noticeable even with these few modifications.
With ECM Titanium you have the tool to bring your calibration idea to life, not only on Mitsubishi Xpander, but on all types of vehicles. Easily and safely edit calibration files from any engine ECU and automatic transmission and increase your business opportunities.
Investi nelle tue competenze per nobilitare il tuo lavoro e incrementare le opportunità di guadagno.
Le giornate di formazione targate Alientech sono approfondimenti mirati alla tua professionalizzazione con nozioni di natura pratica e teorica a 360° sul mondo automotive. Tutto quello che serve per lavorare in ambito riprogrammazione fornendo un servizio completo, affidabile e di valore alla tua clientela.
Un nostro tecnico sarà al tuo fianco lungo il percorso di formazione, e risponderà ad ogni tua richiesta, così da non avere più dubbi e poter cominciare a lavorare, da subito, in completa autonomia!
Siamo un’azienda che, da trent’anni, inventa, crea e produce i migliori strumenti e software per il chiptuning e la meccatronica.
In questi anni di duro lavoro, da piccola realtà di provincia, siamo diventati una multinazionale con sedi e rivenditori in tutto il mondo.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech © 2023 Alientech Srl, Tutti i Diritti Riservati Privacy – Cookie – Termini di utilizzo – Note Legali
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984
