Меню
Меню
Меню
Меню
More performance and driving pleasure thanks to the recalibration of TCU management parameters on the new automatic transmissions supported by KESS3.
Upgrade 1.34
Four new protocols enable you to increase your business and put your best calibration on dozens of new vehicles. In total reliability, you can connect to the TCUs that are equipped on the Audi, Buick, Chevrolet, Daewoo, Ford, Holden, Seat, Skoda and Volkswagen brands. Work on DSG DQ381 automatic gearboxes in VR OBD and in BENCH mode on GM 6T30, 6T35, 6T40, 6T45, 6T50 gearboxes. Finally discover all the secrets of Continental DPS6 TCU calibrations by working in the way you prefer, BENCH or BOOT mode to read, write and clone.
Supported ECUs:
Offer a complete and efficient service with a single tool that communicates faster than ever with supported ECUs and TCUs. Enhance performance, repair and reduce fuel consumption: make your customer satisfied.
Performance enhancement through reprogramming of the automatic transmission control unit is a constantly growing service.
Tuning the management parameters of a gearbox means improving performance and driving pleasure, with a keen eye on fuel consumption. In some cases it is essential to adjust the calibration of the TCUs in order to complete the process and ensure that the engine and gearbox can work in perfect harmony, maximising the vehicle performances.
Alientech has always played a leading role in this sector by offering concrete and powerful solutions for professionals.
Not just tuning! Working on automatic transmission control units is a business opportunity largely dedicated to repair.
More expensive electronic components, such as the TCU, which manages the operation of mechanical parts, can be saved.
Therefore, through recalibration you can spare your customer large sums of money, to the benefit of your business! KESS3 and ECM Titanium are the fastest and most reliable tools for your work.
KESS3
TCU
VR OBD
VR, WR in OBD
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | DQ381 DSG | Audi | — | OBD |
VR, WR in OBD
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | DQ381 DSG | Seat | — | OBD |
VR, WR in OBD
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | DQ381 DSG | Skoda | — | OBD |
VR, WR in OBD
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Bosch | DQ381 DSG | Volkswagen | — | OBD |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T30 | Buick | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T30 | Chevrolet | Available | Bench Mode |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T35 | Chevrolet | Available | Bench Mode |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T40 | Buick | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T40 | Chevrolet | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T40 | Daewoo | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T40 | Holden | Available | Bench Mode |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T45 | Chevrolet | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T45 | Daewoo | Available | Bench Mode |
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T45 | Holden | Available | Bench Mode |
KESS3
TCU
BENCH MODE
RD, WR in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| ACDelco | 6T50 | Buick | Available | Bench Mode |
KESS3
TCU
BENCH MODE
RD, WR and Clone in Bench Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Continental | DPS6 | Ford | Available | Bench Mode |
KESS3
TCU
BOOT MODE
RD, WR and Clone in Boot Mode
| TCU Brand | TCU Version | Vehicle Brand | FULL RD/WR | Mode |
| Continental | DPS6 | Ford | Available | Boot Mode |
ACDelco 6T40 (-30, -35, -45, -50)
The Hydra-Matic 6T40, better known as GM GF6, is a 6-speed automatic transmission that debuted in 2008 to be installed in some of General Motor’s medium and compact models. For all versions, from 6T30 to 6T60, the transaxle design ensures remarkable compactness, ideal for both front and four-wheel drive applications.
The new ‘transaxle’ design, with a torque converter clutch and an electronically controlled auxiliary oil pump, allows the gears to be located on the same centre line as the drive shaft. Thanks to three planetary gears with one fixed and one rotating clutch pack, this transmission embraces clutch-clutch technology and eliminates cumbersome free-wheel mechanisms. This transmission also differs from the 6T30 in the use of heavier components, which allows it to handle higher torque motors.
Here again, the modification of the parameters will lead to a reduction in shifting time, increasing performance and fluidity of gear changes, especially at low revs.
Bosch DQ381
If maximum performance was achieved with the DQ500, the natural evolution of technology led the VW group to design the DQ381. The keywords are economy and lightness. This small-sized gearbox is installed on the MQB platform (Audi, Seat, Skoda, Volkswagen), to provide traction, primarily, to the highest-performance 2.0 turbo-petrol engines with an eye on fuel consumption.
Developed to support a torque value of 420Nm, on both front-wheel drive and all-wheel drive, it is capable of further increasing its values. The two clutches in oil bath and the same technology as the parent DQ500 (primary and secondary shafts handling odd and even gears) already allow speed and driving comfort in the stock configuration.
By modifying the parameters, a reduction in shifting time at lower REVS will be tangible, exponentially increasing the performances and fluidity of gear changes.
Continental DPS6
The Ford PowerShift transmission is among the most advanced six-speed dual-clutch transmissions from the American manufacturer and can improve fuel efficiency by up to 10 per cent compared to a conventional automatic transmission. Installed mainly on small and medium-sized cars with front-wheel drive, it has two modes: with dry clutches or in oil bath, depending on the application.
As with DSG gearboxes, the even ratio is managed by a primary shaft and the odd ratio by a secondary shaft, each with its own clutch pack driven by an ingenious electro-hydraulic system. Once again, the need to reduce overall dimensions, masses and consequently fuel consumption, guarantees a high level of performance across the entire operating range.
With a maximum torque value of 250Nm, it will be necessary to act cautiously on the calibration, especially when modifying the limiters. Thanks to the cloning possibility of this TCU, however, it is possible to intervene on a broad spectrum, and not only in terms of performance.
Invest in your tuning skills to improve your work and increase your earning opportunities.
Alientech training days are in-depth sessions aimed at your professionalization with all-round practical and theoretical knowledge of the automotive world. Everything you need to work in the tuning field providing a complete, reliable and valuable service to your customers.
One of our specialists will be at your side along the training path and will answer any questions you may have, so that you will no longer have any doubts and you can start working, right away, in complete autonomy!
Уже тридцать лет мы как команда разрабатываем, создаем и производим лучшие инструменты и программное обеспечение для чип-тюнеров и мехатроники.
За эти годы напряженной работы мы развились. Из динамичного стартапа мы превратились в многонациональную фирму с офисами и дилерами по всему миру.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech © 2024 Alientech Srl, All Rights Reserved Privacy — Cookie — Terms of use — Legals — Edit cookies’ settings
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984
