¡Aumenta el potencial con ECM Titanium!
ECM Titanium Tuning Tips
The “Burbles” or “Pop&Bang” is a highly sought-after sound effect among sports car owners.
These are generally popping and crackling sounds produced during overrun, resulting from a combination of retarded ignition timing and a delay in the cut-off activation.
This phenomenon can be managed at various engine speeds, especially on vehicles with modified exhaust systems, through specific adjustments to the engine control unit (ECU) parameters. Many sports car enthusiasts love the aggressive and sporty sound that “Burbles/Pop&Bang” gives to their vehicles.
This sound has become a hallmark of high-performance cars, so much so that some manufacturers have started to include it as a standard feature on certain models.
The Burbles/Pop&Bang effect is obtained through a series of modifications to the ECU maps:
To achieve the popping sounds, ignition timing needs to be retarded. This ensures that part of the combustion occurs with opened exhaust valves, producing the characteristic pops and crackles in the exhaust system.
Please note that this effect generates high backpressures and EGT in the exhaust during lift off conditions: if the car is equipped with a stock catalyst it will be necessary to work with low increments on maps otherwise you can damage some engine components (turbocharger, valve seats, etc) or the catalytic converter.
The maps that manage the fuel cut-off during throttle release must be adjusted. This incluedes the overrun fuel cut-off delay maps and its switch.
The maps that manage the base, optimal and minimum spark advance have to be modded to obtain the desired effect.
Powergate
Powergate es la nueva generación de programador portátil de unidades de control de motor para coches y motocicletas, creado para ofrecer a cada conductor una experiencia de conducción personalizada de su vehículo.
Gracias a un diseño compacto y conexión con una aplicación intuitiva, Powergate proporciona una experiencia de tuning del vehículo altamente personalizable y precisa.
Burbles/Pop&Bang on Abarth 595:
Thanks to the maps available in the driver for the Bosch ME17.3.0 ECU equipped on the Abarth 595, it is possible to activate this function with maximum precision.
This small guide will explain how to work on the overrun activation maps and the minimum advance maps to achieve the best result. We will use the ECM Titanium software for these modifications because it allows you to:
To start the modification, it is necessary to define how to make the fuel cut-off management work, using the fuel cut-off switch and then by modifying the maps related to delay time and engine speed threshold.
It is essential to set the minimum, base and optimal spark advance maps to make pops and bangs from the exhaust. In this case i twill be necessary to set an ignition delay, after the top dead center, at the desired engine speed range and at low engine loads.
Generally it is possible to manage more precisely the popsbangs by setting the siwtch to value “1” and then working by delay time cut off maps.
To regulate frequency and volume of the popsbangs effect it will be necessary to work on the ignition angle going over the TDC (set negative values on the spark advance maps). The higher will be the negative value, the higher will be the volume of the bangs. We suggest not to set a value that’s too low in order to not damage the engine.
10 – 14 de septiembre de 2024, Messe Frankfurt
PABELLÓN 9.0 – STAND D10
Únete a nosotros para descubrir los últimos desarrollos en el mundo de la reprogramación de Alientech. Será la oportunidad perfecta para profundizar en nuestro conocimiento sobre productos y servicios dedicados a profesionales como tú.
Innovación, novedad y oportunidad: ven y mira cómo Alientech puede transformar tu negocio con soluciones avanzadas y personalizadas para el chiptuning. Interactúa con expertos de la industria que demostrarán cómo puedes mejorar tu trabajo de primera mano. No te pierdas esta oportunidad, marca las fechas en tu calendario y prepárate para el evento.
¡Nos vemos en Fráncfort, no faltes!
¿Quieres mejorar aún más en lo que haces?
Echa un vistazo a nuestros programas de formación en todo el mundo. Invierte en tus habilidades y aumenta tu potencial de ganancias. Un especialista estará contigo en cada fase del recorrido, para que puedas comenzar a trabajar con confianza de inmediato.
The power of information will be in your hands, and with ECM Titanium, you can make the most of it: contact us today for more information.
Es una empresa que, desde hace treinta años, inventa, crea y produce las mejores herramientas y software para el chiptuning y la mecatrónica.
En estos años de duro trabajo, hemos pasado de ser una pequeña empresa provincial a una multinacional con oficinas y distribuidores en todo el mundo.
P.IVA IT02007510023
Cap. Soc. € 10.329,14
Registro Produttori AEE IT10120000006984
Alientech © 2024 Alientech Srl, All Rights Reserved Privacy – Cookie – Condiciones de uso – Avisos legales – Editar la configuración de las cookies
Alientech Srl Cap. Soc. € 10.329,14 P.IVA IT02007510023 Registro Produttori AEE IT10120000006984